6
Step 15: Continued
Install Track Support.
Back Gables
SB
29CB
You will need for this page:
Working one (1)
Gable
at a time, lift
Left
and
Right Gables
into place on top of
Rear Wall
Angle
.
Gables
must go under
Side Wall Angles
. Secure using seven (7)
Gray Screws
and
one (1)
Stone Bolt
per
Gable
.
2
29
Join
Left
and
Right Gables
together using
Gable Brace
and securing
with one (1)
Stone Bolt
and
Nut
in the second hole from the bottom. Apply
Weather Stripping
along the mating edge of the
Left
and
Right Gable
as
shown. Cut the
Weather Stripping
to length. Repeat for opposite side.
4
67545
Weather
Stripping
1
(QTY: 32)
GS
Gables must go under
Side Wall Angles.
Weather Stripping Tape
Top View of Gables
Tape should wrap
around gap between
Gables.
9009
Gable Brace
2
(QTY: 5)
SB
Attach Brace with Bolt thru
second hole from bottom only.
SB
6228
Track Support
2
Position
Track Support
as shown. Secure
Track Supports
to
Gable
using
one (1)
Stone Bolt
. Secure to
Header
using two (2)
Gray Screws
per side.
5
Working one
Gable
at a time, lift
Left
and
Right Gables
into place on top of
Header
.
Gables
must go under
Side Wall Angles
. Secure using seven (7)
Gray Screws
per
Gable
. Do not insert
Screws
into the two (2) holes closest
to the peak of each
Gable
. These will be used to attach the
Track Support
later.
3
Front Gables
Leave hole open
