6
Step 11:
Studs
24
24CB
You will need for this page:
Following dimensions, measuring from the end of angle, position a
Stud Assembly
inside top
angle and fasten with one (1)
Gray Screw
through the lower hole of angle.
1
(QTY: 12)
GS
Place bottom of
Stud Assembly
over
Floor Frame
as shown. Do not fasten bottom at this
time. Repeat procedure for the remaining
Stud Assemblies
around the building.
2
Assemblies from step 3:
• Stud Assemblies (12)
Inside
Outside
19 1/16”
(48,4 cm)
39 1/16” (99,2 cm)
59 1/16” (150,0 cm)
9” (22,9 cm)
49 3/8” (125,4 cm)
29 3/16” (74,1 cm)
(QTY: 2)
SS
10834
Front Wall
Channel
2
Place
Front Wall Channels
into poisiton behind
Corner Post
and
Door Jamb
. Fasten using
three (3)
Stone Screws
as shown below.
3
10834
10834
Do not fasten
at this time.
Washer
(QTY: 4)
SS
