Arrow Storage Products EPA84, Owner'S Manual & Assembly Instructions

Page: 17 / 28

1
Position rear corner panels at the
rear corners, as shown. The widest
part of each corner panel must be
placed along the rear of the building.
Fasten the corner panels to the fl oor
frame with four screws.
2
Position front corner panels at the
corners of the fl oor frame as shown.
The widest part of each corner panel
must be placed along the front of the
building. A small gap will exist be-
tween front corner panel and ramp.
Fasten the corner panels to the fl oor
frame with three screws.
NOTE
Be careful to install the correct
panel in each position as shown
NOTE
The remainder of the building assembly
requires many hours and more than one
person. Do not continue beyond this
point if you do not have enough time to
complete the assembly today. A partially
assembled building can be severely
damaged by light winds.
Each screw and bolt in the wall re-
quires a washer.
3
Double-check the part numbers of
the wall panels, before proceeding.
The fl oor frame must be square
and level or holes will not align.

9381 Front Corner Panel (2)

9385 Rear Corner Panel (2)

Parts Needed For

Corners
Step 6
YL16
FRONT
STEP
TOP VIEW
9385
SIDE
REAR
Wide
Side
9381
SIDE
Narrow Side
9385
2
9381
STEP
1
Washer
Panels rest on
frame as shown
9381
9385
9385
9381
STEP
3
CORRECT
INCORRECT
(14)
16