13
You will need for this page:
Washers are to be used on
painted parts only. Washers
are not necessary on unpainted
parts and there are not enough
to use on every screw and bolt.
Step 1: Floor Frames
13DG
CHECK THAT ALL ASSEMBLED PARTS ARE
THE CORRECT LENGTH BEFORE CONTINUING
Finished Length
119 3/8” (303,2 cm)
FRONT
9367
8934
9367
Four (4) Screws per side.
Overlap the
Ramp
and two (2)
Front Floor Frames
so that four (4) holes align at each end as shown.
Insert four (4)
Small Screws
in each end.
1
2
Confi rm that the drain holes are facing outside
the building. Check that the fi nished length of the
Assembly is 119 3/8” (303,2 cm). Set aside for use
in Step 4.
FRONT
Drain holes must face outside the building.
8934
Ramp
1
9367
Front Floor
Frame
2
(QTY: 8)
SS
Summary of Contents for ED102
Page 36: ......
