background image

Model No.   EH86 A   LM86   ML86 A   SA8662 A     

         VL8662 A   WL86 A   WL86EU A   WL86Z 

                        EH86EU A   EH86BS A   EH86S   EH86Z

                         LM86GR   LM86SB   697.76095

Owner's Manual & Assembly Instructions

709140418

 

                                                                   Exterior Dimensions                            Interior Dimensions                                 Door

              *Approx.                            Base                            (Roof Edge to Roof Edge)                              (Wall to Wall)                                   Opening

                    Size                                Size                           Width        Depth        Height               Width        Depth       Height             Width        Height      

 

                   8' x 6'                 97 1/2" x 68 3/4"               99 3/4"       71 1/4"      69 7/8"              94 3/4"         66"           68 5/8"            43 1/2"          60"       

  Storage Area:   43 Sq. Ft.     237 Cu. Ft.

 

                4,0 m

2

             6,7 m

3

BUILDING DIMENSIONS  * Size rounded off  to the nearest foot

      2,4 m x 1,7 m          247,7 cm x 174,6 cm             253,4 cm     181,0 cm     177,5 cm             240,7 cm     167,6 cm     174,3 cm           110,5 cm      152,4 cm

CAUTION: SOME PARTS HAVE SHARP EDGES. CARE

MUST BE TAKEN WHEN HANDLING THE VARIOUS PIECES

TO AVOID A MISHAP. FOR SAFETY SAKE, PLEASE READ

SAFETY INFORMATION PROVIDED IN THIS MANUAL

BEFORE BEGINNING CONSTRUCTION. WEAR GLOVES

WHEN HANDLING METAL PARTS.

Missing Parts, Questions on Assembly?

Call:  1-800-851-1085 or assist@arrow-

sheds.com

Do not return to dealer, they are not 

equipped to handle your requests.

 

DX01

Summary of Contents for 697.76095

































Reviews: