1
Position the rear corner panels
at the rear corners, as shown. The
widest part of each rear corner panel
must be placed along the rear of the
building. Attach the corner panels to
the fl oor frame with four screws.
2
Position a front corner panel
at the corner of the fl oor frame as
shown. The widest part of each front
corner panel must be placed along
the front of the building. A small gap
will exist between front corner panel
and ramp. Fasten the corner panel
to the fl oor frame with three screws.
3
Double-check the part numbers of
the wall panels, before proceeding.
NOTE
The remainder of the building assembly
requires many hours and more than one
person. Do not continue beyond this
point if you do not have enough time to
complete the assembly today. A partially
assembled building can be severely
damaged by light winds.
Each screw and bolt in the wall re-
quires a washer.
The floor frame must be square
and level or holes will not align.
9381 Front Corner Panel (2)
9385 Rear Corner Panel (2)
Parts Needed For
Corners
Step 6
P19 ctr
FRONT
STEP
TOP VIEW
9385
SIDE
REAR
Wide
Side
9381
SIDE
Narrow Side
9385
2
9381
STEP
1
Washer
Panels rest on
frame as shown
9381
9385
9385
9381
STEP
3
CORRECT
INCORRECT
(14)
NOTE
Be careful to install the correct
panel in each position as shown
19
Summary of Contents for 697.76095
Page 2: ......
