WWW.ARRMA-RC.COM
ESC Specifications
Input Voltage
2S-3S LiPo (7.4-11.1v) 50C 5000mAh
Minimum Req. 6-8 Cell NiMh (7.2v-9.6v)
BEC Output 6.0v/4A Max
Throttle
Setup
Connect batteries, turn on TX and press/hold the set button ‘A’. Turn the switch on
‘B’ and release the set button when the RED light flashes on the ESC.
1. TX in neutral - press set
button (1 Green flash)
2. TX full throttle - press set
button (2 Green flashes)
3. TX full brake - press set
button (3 Green flashes)
4. Switch off ESC to complete setup
Only use fully charged LiPo batteries (4.2V per cell) to prevent
battery/ESC damage.
Electronic Speed Controller (ESC)
Battery Plug
WARNING:
Heat sink
may be hot after use.
Receiver Plug (CH2)
Power Switch & Set button
Motor wires x 3
CONTROLLER OFF SECOND
A
B
17
Summary of Contents for ARA4305V3T1
Page 13: ...WWW ARRMA RC COM Install Charged Batteries In Car Steering Neutral 13 ...
Page 27: ...WWW ARRMA RC COM Lenkung Neutralposition Setzen Sie den geladenen Akku in das Fahrzeug ein 27 ...
Page 41: ...WWW ARRMA RC COM Neutre de direction Installer les batteries chargées dans la voiture 41 ...
