TM702G 4-cell Battery Installation and Replacement
Use this procedure to install or replace a 4-cell backup battery.
1 Insert a finger into the latch opening, press down and pull back on the latch
holding the battery door (on the bottom of the Telephony Modem). Pull the
door toward you. Set the door aside in a safe place.
CAUTION
Risk of equipment damage
Improperly inserting the battery may damage the battery connector in
the Telephony Modem. Carefully follow the instructions in the next step
to avoid damage.
2 Hold the battery pack so that the guides on the battery align with the slots
on the Telephony Modem and slide the battery into the bay. The diagram on
the left shows the proper orientation.
Note: Batteries will not insert completely into the Telephony Modem if not
oriented correctly. The battery should slide into the bay without significant
force. Line up the slots in the battery bay with the guides on the battery
and apply even pressure on both ends of the battery.
Touchstone TM702 Telephony Modem User’s Guide
Safety
Getting
Started
Battery
Installation
Installation
USB
Drivers
Ethernet
Configuration
Usage
Troubleshooting
Glossary
16
Latch End
Battery
Pull Strap
Battery Guide
Battery Slot
WRONG
WRONG
RIGHT
