Chapter 4
:
Install, connect and configure your Telephony Gateway
Final 1.0 October 2018
Touchstone TG3442S Telephony Gateway User Guide
© 2018 ARRIS Enterprises LLC. All Rights Reserved.
18
6.
Power:
connector for the power cord.
Access the configuration interface
Before you begin, you should set up the TG3442S as described in Install and connect your
Telephony Gateway.
1.
If security has been properly set up on your computer to access the wireless LAN on the
TG3442S, use the connection utility for your operating system to connect to the wireless
LAN using its network name (SSID).
2.
If you cannot access the wireless LAN, you must first establish a wired Ethernet
connection between your computer and the TG3442S.
3.
Open a web browser and navigate to
http://192.168.0.1/
to access the wireless router
setup.
The Login screen appears.
Note:
The configuration interface
enters a username automatically.
You will be able to
choose a password the first time that you access the configuration interface.
4.
Follow the instructions on the screen to enter a password
The System Basic Setup screen appears.
Note:
Most configuration parameters that you may want to set can be accessed on
the System Basic Setup screen, including the security mode and setting a system password.
