Setting Up a Wireless Network Connection
SURFboard® SBG6900-AC Wireless Cable Modem & Router
•
User Guide
22
365-095-27293 x.1
Copyright 2015 ARRIS Enterprises, Inc. All Rights Reserved.
1.
Power ON your gateway and other WPS-enabled wireless devices that you want to connect
to your wireless network.
2.
Press and hold the WPS button located on the top of the SBG6900-AC for five to 10 seconds
and then release.
Figure 22 – SBG6900-AC WPS Pairing Button
3.
If applicable, press the WPS button on your WPS-enabled computer or other WPS-enabled
wireless device.
4.
Repeat step 3 for each additional WPS-enabled wireless device that you want to connect to
your wireless network.
Test Your Wireless Network Connection
Perform the following connectivity test to check that your SBG6900-AC and other wireless
devices are connected to your wireless home network:
1.
If the wireless devices successfully connected to the wireless network, disconnect the
Ethernet cable from your computer and SBG6900-AC.
2.
Open a web browser on your computer.
3.
Type a valid URL (such as
www.surfboard.com
) in the address bar and then press
Enter
.
If the website did not open, please call
ARRIS Technical Support
for assistance.
WPS button