Appendix A: ARRIS Safety, Environment, Regulatory, Software License, Privacy, and Warranty
information
■
Wipe the device with a clean, dry cloth. Never use cleaning fluid or similar chemicals. Do
not spray cleaners directly on the device or use forced air to remove dust.
■
For added protection, unplug the device from the wall outlet and disconnect the cables
to avoid damage to this device during lightning activity or power surges.
CAUTION:
To reduce the risk of fire, use only No. 26 AWG or larger (e.g., 24 AWG)
UL Listed or CSA Certified Telecommunication Line Cord, or national equivalent.
■
Upon completion of any service or repairs to this device, ask the service technician to
perform safety checks to determine that the device is in safe operating condition.
■
Do not open the device. Do not perform any servicing other than that contained in the
installation and troubleshooting instructions. Refer all servicing to qualified service
personnel.
■
This device should not be used in an environment that exceeds 104° F (40° C).
SAVE THESE INSTRUCTIONS
Note:
To CATV system installer
— This reminder is provided to call the CATV system
installer’s attention to Section 820.93 of the National electric code, which provides
guidelines for proper grounding and, in particular, specifies that the coaxial cable
shield must be connected to the grounding system of the building, as close to the
point of cable entry as practical.
Caring for the environment by recycling your
ARRIS equipment
Please do not dispose of this product with your residential or commercial
waste. Contact your local authorities for information about practices
established for your region. If collection systems are not available, call
ARRIS Technical Support at
1-877-466-8646
for assistance.
SURFboard mAX User Guide Standard Revision x.1
52