17
3.8 LMB 4x5 19 mm Studio Rod Adapter
• The LMB 4x5 19 mm studio rod adapter can be mounted directly under the lightweight
support or the tilt and flex module.
• Secure the studio support without tools by using the thumbscrew.
• If necessary, use a screwdriver to tighten the studio support.
3.9 LMB 4x5 15 mm Studio Rod Adapter
• The LMB 4x5 15 mm studio rod adapter can be mounted directly under the lightweight
support or the tilt and flex module.
• Secure the studio support tool less with the thumbscrew.
• If necessary, use a screwdriver to tighten the studio support.
Instructions
3.10 Tray Catcher
Mounting the tray catcher
The bottom tray catcher is designed to secure the filter trays for situations when safety
is paramount (e.g. when travelling above a crowd).
• Usa a Hex driver 2 to mount the tray catcher with two screws at the bottom of the
basic module.
How to use
• The tray catcher clicks into position (both ways).
• Position 1:
0°
The tray catcher can be permanently mounted and
clicked into place when required (Fig. 1).
• Position 2:
45° Covers two filter trays (Fig. 2).
• Position 3:
90° Covers three filter trays (Fig. 3).
Fig. 1
Fig.2
Fig.3
Position 3 is not possible in combination with LMB 4x5 extra rotatable filter stage.
NOTICE
