10
3.3 LMB 4x5 Tilt and Flex Adapter
The flexible rubber donut adapter can be used for a variety of lenses with small to large
diameters and can be used with the LMB 4x5 swing away tilt module or with lenses
containing elements that extend.
To attach the tilt and flex adapter to the LMB 4x5:
• Open the metallic screws at the left and the right side to unlock the clamp device (Fig.1).
• Position the tilt and flex adapter through the locking thumbscrews so it sits flush with
the filter stage (Fig.2).
• Slide the clamp adapter upwards (Fig.3).
• 2-stage version: Lock the clamp adapter using the two metallic locking thumbscrews
positioned sideways at the filter stages (Fig.4).
3- stage version: Lock the clamp adapter using the two black locking thumbscrews
positioned at the rear of the filter stage (Fig.5).
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Instructions
