Installation and Operation
21
8.6.5 Filter
ATTENTION
A too high filter value may cause a delay in response.
When the DEP-1 is used in a car or a train, vibrations of the vehicle
may be transmitted to the DEP-1's encoders.This can lead to irritations
in the pan and tilt axis.
In case of such irritations, the operator can use the Filter function to
set a low-pass filter value, which allows to lowpass these disturbing.
8.6.6 Ratio
Selecting Ratio will open a new sub menu where you can select the
required Speed Ratio of the selected axis.
When shooting with an extreme tele lens, it can be very helpful to
change the speed ratio from 0 (1:1) to -30. This will reduce the speed
development to -30%.
