5
4
3
2
1
7
6
KW8
Ver. 1.2
9
7. CoNNECTING THE UNIT
7.1 BACK PANEL CoNNECToRS
1)
AUDIO INPUT. Female XLR for analog signal input.
2)
AUDIO LINK. Male XLR parallel output providing a direct signal from the Audio Input.
3)
DMX INPUT. Male XLR for DMX signal.
4)
DMX LINK. Female XLR for DMX signal.
5)
AC MAINS. PowerCon input for AC power.
6)
VIDEO OUT. BNC connector for video signal output.
7.2 MAINS PowER CoNNECTIoN - voLTAGE SELECToR
All speakers and the connected audio equipment (mixing consoles, processors, etc.) must be connected
to the AC power distribution in a proper way, preserving AC line polarity and ground connection such
that all grounding points are connected to a single node or common point using the same cable
gauge as the neutral and line(s) cables. Bad grounding connections between speakers and the rest of
the audio system may produce noise, hum and/or serious damage to the input/output stages in the
system’s electronic equipment.
CAUTION. Before applying AC to any K-array self-powered
speaker, be sure that the voltage potential difference between
neutral and ground is less than 5 VAC.
