SDI to USB grabber
Camera connected via BNC cable + K-USB/SDI adapter
BNC cable
USB cable
2 (+)
3 (-)
1 (gnd)
120
Ω
DMX terminator
KW8
Ver. 1.2
12
For installations where long distance DMX cable connections are needed, we suggest using a DMX
terminator. Please note:
•
The DMX terminator is a male XLR 3 pins connector with a 120 ohm resistor between pin 2 and
3.
•
The DMX terminator must be plugged into the last unit (DMX OUT panel connector) of the DMX.
line.
7.5 vIDEo CoNNECTIoN
The K-OWL features a HD-SDI camera supporting multiple output formats. As default, the camera
outputs a digital HD-SDI signal at 1080 Progressive (25 fps). If an analog signal or a different
resolution of the camera is desired, please contact the official K-array distributor in your country.
To connect the camera to your computer running the OWL-Manager software, you need a SDI to USB
grabber, as shown in the scheme below. We recommend using the K-USB/SDI accessory.
