I N S T A L L A T I O N I N S T R U C T I O N S
Mono mic level Input Module Wiring
4.15
Aud
Utl
Cue
A/B
Pgm
Mic
1
2
3
4
5
6
7
8
Talk
Tally
Channel Off
Ground
Channel On
Cough
nc
nc
Logic
1
2
3
4
5
6
7
8
(+) in
(-) in
nc
Ground
nc
nc
nc
nc
‘B’ Mono Mic Input
1
2
3
4
5
6
7
8
(+) in
(-) in
nc
Ground
Stop Logic
nc
Logic common
Start Logic
‘A’ Mono Mic Input
1) Mono Mic Input module (MARC-MIC)
MIC & STEREO LINE MODULES
Channel Control Logic (Turrets)
The pins on the ‘Logic’ connector
are used to remote control the
module for applications such as
studio talk turrets. Controls include
Channel On, Off, Tally LED driver
for on-off status, Talk to Console,
and momentary Cough logic. All
control is by dry closure to ground.
The tally LED should be connected
through a 510 ohm resistor to
ground.
Channel On
Channel Off
On-off Tally LED
Talk to Console
Cough
Ground
‘A’
Input
‘B’
Input
Connectors
Logic ‘B’ ‘A’
PIN
Wire Color
Audio
1
White w/Orange Stripe
Left (+)
2
Orange w/White Stripe
Left (-)
3
White w/Green Stripe
Right (+)
4
Blue w/White Stripe
Ground
5
White w/Blue Stripe
6
Green w/White Stripe
Right (-)
7
White w/Brown Stripe
8
Brown w/White Stripe
1,2,3,4,5,6,7,8
RJ45
EIA/TIA 568B WIRING STANDARD COLORS
Channel Control Logic (Turrets)
The pins on the ‘Logic’ connector are used to remote control the mod-
ule for applications such as studio talk turrets. Controls include Chan-
nel On, Off, Tally LED driver for on-off status, Talk to Console, and
momentary Cough logic. All control is by dry closure to ground. The
tally LED should be connected through a 510 ohm resistor to ground.
Channel On
Channel Off
On-off Tally LED
Talk to Console
Cough
Ground