O P E R A T I N G I N S T R U C T I O N S
The Control Room Monitor system
The Control Room Monitor system is the main audio moni-
toring system for the studio. It features an input selector
switch and a volume level control. The output of the monitor
system is connected to an external audio power amplifier
and speakers. The level control on the external amplifier
should be set for the maximum sound level desired in the
studio.
MONITOR MUTING
When a control room microphone module is turned on, the
monitor system will mute (audio is turned off) so that there
will not be feedback from the speakers to the microphone.
MONITOR SELECTOR SWITCH
This switch selects the audio source for the Monitor sys-
tem.
1) AIR- this is usually an off air audio feed to monitor the
actual transmitted signal
2) PGM- the main Program output bus from the console
3) AUD- a secondary Program bus that can be used for
several purposes such as Recording
4) UTL- a secondary Program bus that can be used for
several purposes such as Recording
MONITOR VOLUME FADER
Sets the monitor level into the external audio amplifier and
speaker.
3.5
Cue
Monitor
Head
phone
Aud
Utl
Ext1
Pgm
Stop
Reset
Auto
Start
Timer
Output
Timer
Monitor
selector
Monitor
Volume