62
I
NSTALLATION
T
URN
O
N
/O
FF
To turn on/off the UPS, you should press the on/off switch three seconds at least.
Only for the first time you switch on:
after about 30 sec., check that the UPS is working correctly by:
1. Simulating a black-out by removing the mains power cable
2. The load must continue to receive power, the “battery mode” indicator should light up and the UPS
should beep every 4 seconds.
3. Reconnect the power cable. Normal mains power operation should be restored.
C
OOL
S
TART
F
UNCTION
Cool start function enables UPS to be started up when AC utility power is not available and battery is full
charged. Just simply press the On switch to turn on the UPS.
C
HARGING
This UPS is shipped from the factory with its internal battery fully charged; however, some charge may be lost
during shipping. The battery should be recharged prior to use. Plug the UPS into an appropriate power supply
and allow the UPS to charge at least 8 hours.
