Wall Mount Installation:
Handle installation:
1. Use the screws to fasten the bracket to the wall.
2. Wrap the neck of the bottle with PTFE tape to seal it and screw the bottle to the diffuser.
3. Connect the air tube to the pump's air outlet.
4. Connect the other end of the air tube to the adaptor on the bracket.
5. Take an HVAC adaptor and screw it to the top of the diffuser.
6. Connect a separate 6 - 12 inch air tube to the diffuser top.
7. Connect the air tube from the top of the diffuser into the air duct by drilling a 6mm
opening past the filters. Make sure the tube is pointing with the direction of the air flow,
not against it.
8. Connect with power supply, turn on the air pump switch.
9
SET
ENT
SET
ENT
SET
ENT
Air outlet
hole
HVAC connection
SET
ENT
