To Clean the Underside of the Lid: (See Diagram 1)
The underside of the lid should be cleaned after
every use.
1. Detach the inner lid from the shaft by gently
tugging it outward. Soak briefly.
2. Wipe the underside of the lid with a warm, damp
cloth.
3. Dry with a soft, dry cloth.
4. Install the inner lid to the outer lid by pressing the
inner lid over the inner lid shaft. After installing the inner lid, the small side of the
inner lid seal should face you with the outer lid open. If the inner lid is inserted
improperly, the outer lid will not close.
7
HOW TO CLEAN
Always unplug unit and allow to cool
completely before cleaning.
To Clean Exterior Body and Inner Pot:
1. Remove the inner pot. Wash it in warm, soapy water using a nylon sponge or
dishcloth.
2. Rinse and dry thoroughly.
3. Empty out the condensation collector into a sink after each use. Remove the
condensation collector by pulling it out from its indented portion. Reattach the
condensation collector before next use.
4. Wipe the body of the rice cooker clean with a damp cloth.
To Clean Heating Plate: (See Diagram 2)
The heating plate should be cleaned after every use.
1. Wipe the heating plate with a warm, damp cloth.
2. Dry with a soft, dry cloth.
3. Rice grains or other dried materials may stick to the
heating plate. Repeat Steps 1 and 2 until the
heating plate is completely clean to ensure full
contact between the inner pot and the heating
plate. Otherwise, the appliance will not close
properly and may overheat.
Diagram 1
CAUTION:
Never clean the appliance while the cooker is still hot.
Diagram 2
1. A short power-supply cord is provided to reduce the risks resulting from
becoming entangled in or tripping over a longer cord.
2. Longer extension cords are available and may be used if care is exercised in
their use.
3. If a longer extension cord is used:
a. The marked electrical rating of the extension cord should be at least as
great as the electrical rating of the appliance.
b. The longer cord should be arranged so that it will not drape over the
countertop or tabletop where it can be pulled by children or tripped over
unintentionally.
c. If the appliance is of the grounded type, the extension cord should be a
grounding wire/cord.
2
SHORT CORD INSTRUCTIONS
This appliance must be grounded while in use to protect the operator from
electrical shock. The appliance is equipped with a 3-conductor cord and a 3-
prong grounding-type plug to fit the proper grounding-type receptacle. The
appliance has a plug that looks like sketch A. An adapter, sketch B, should be
used for connecting sketch-A plugs to two-plug or two-prong receptacles. The
grounding tab, which extends from the adapter, must be connected to a
permanent ground such as a properly grounded outlet box as shown in sketch C
using a metal screw.
GROUNDING INSTRUCTIONS
(A)
CIRCUIT GROUNDING
CONDUCTOR
CONNECTED
PROPERLY
GROUND
PRONG
(C)
ADAPTER
GROUNDING MEANS
AA22D
(B)
METAL
MOUNTING
SCREW
COVER OF GROUNDED
OUTLET BOX
NOTE:
• Do not use harsh abrasive cleaners or products that are not considered
safe to use on nonstick coatings.
• Always make sure the outside of the inner pot is dry prior to use. If the
inner pot is returned when wet, it may damage this product, causing it to
malfunction.
• Any other servicing should be performed by Aroma Housewares
Company
.
THIS APPLIANCE IS FOR COMMERCIAL USE ONLY.
