Belgrado TCBM-TCPW
Deutsch
05060145 01 31/08/2015
49
Alle Reinigungseingriffe sowie die Desinfektion, das Spülen und Trocknen
müssen mit größter Sorgfalt erfolgen und dabei alle Reste Wasser oder
Reinigungsmittel entfernt werden, um eine Vermehrung der
gesundheitsschädigenden Bakterien zu verhindern. Teile, bei denen vor dem
Trocknen nicht alle Reinigungs- oder Desinfektionsmittel entfernt wurden,
können beschädigt werden.
18_8.Kontrolle der Bauteile
Nach dem Reinigen, Desinfizieren, Spülen, Trocknen und der Kontrolle genau prüfen,
dass alle Teile einwandfrei sauber und trocken sind und keines der Teile beschädigt
wurde oder sehr abgenutzt ist. Falls notwendig, auswechseln.
Die völlig trockenen Elemente wieder einbauen und den Stromversorgung wieder
einschalten. Nachdem die Innentemperatur für den Betrieb erreicht wurde, kann das
Möbel mit den Ausstellungsprodukten aufgefüllt werden.
19.Demontage des Möbels - Fachtechniker -
Die Zerlegung des Möbels muss in Übereinstimmung mit den Verordnungen der
einzelnen Länder und unter Berücksichtigung der Umweltschutzvorschriften zur
Verwaltung von Abfällen vorgenommen werden. Dieses Produkt wird von der
geltenden Gesetzgebung als gefährlicher Abfall betrachtet und muss somit getrennt
entsorgt werden. Es kann nicht als Hausmüll behandelt oder auf einer Müllhalde
abgelegt werden. Vor der Demontage des Möbels müssen das Kältemittel und das
Schmieröl abgelassen und aufgefangen werden. Dieses Produkt besteht zu 75% aus
recycelbarem Material. Bei der Herstellung verwendete Materialien:
- Lackierter Stahl:
Pfosten, Regale, Füße
- Kupfer, Aluminium:
Kältekreis, Elektroanlage und obere Deckenlampe
- Zinkblech:
Untere und lackierte Verkleidungen, Tragwerk,
Ablagen, Tabletts
- PU-Schaum (H
2
O):
Wärmeisolierung
- Hartglas:
Kristallwände
- Holz:
Seitenrahmen geschäumte Wanne
- PVC
Stoßdämpfer und Handlauf
- Polystyrol:
warmgeformte Seitenteile
- Polykarbonat
Schutz fluoreszierende Lampen
z
Ein weiches Tuch mit neutralem Reinigungsmittel oder lauwarmes Wasser
(max. 30°C) und Seife benutzen.
z
Sofort mit einem trockenen Tuch jeden Wasser- oder
Reinigungsmittelrückstand beseitigen, um Fleckenbildung zu vermeiden.
z
Führen Sie vor der Behandlung der Oberflächen gegebenenfalls an einer
kleinen und verborgenen Stelle eine Überprüfung des Reinigungsmittels
durch, um sicherzustellen, dass das fragliche Produkt die Beschichtung nicht
beschädigt und die Farbe oder Deckkraft ändert.
Beseitigen Sie Schwämme, Lappen, Rückstände von Reinigungsmittel oder
Wasser usw. vom Boden, welche ein Ausrutschen oder Stürze verursachen
könnten.
z
Der Benutzer ist dafür verantwortlich, das zu entsorgende Produkt für die
Rückgewinnung und das Recycling der Materialien den spezialisierten
Sammelstellen zuzuführen, die von den örtlichen Behörden bestimmt oder
vom Hersteller angegeben wurden.
z
All diese Arbeiten wie auch der Transport und die Behandlung von Abfällen
dürfen ausschließlich von autorisiertem Fachpersonal ausgeführt werden.