Arneg Astana LX, Direction For Installation And Use

Page: 60 / 172

Astana LX - Mini Astana LX
English
05060194 01 05-2022 58
The cleaning operati ons must include:
Step Name Descripti on
1 Washing mechanical roughing, removal of approximately 97% of the dirt.
2 Sanitati on eliminati on of bacteria and harmful substances.
3 Rinsing
4 Drying
23. 1 Cleaning products
Use
- clean water at maximum temperature of 30°C
- soft cloth
- mild and neutral detergents
Do not use
alcohol-based
- detergents or similar products to clean the parts in methacrylate (Plexiglass)
- in powder
- with granules
- either acidic or alkaline (bleach, ammonia)
- concentrates
- with unknown chemical compositi on
- abrasive products, chemical/organic solvents
- abrasive sponges, scourers, sharp tools
- aggressive solvents (aceti c acid, citric acid etc.)
23. 2 General informati on
• The surfaces to be cleaned and the detergents and water used for cleaning must not exceed a
maximum temperature of 30°C.
• Dry the surfaces with a soft cloth
ATTENTION !
Fragile surfaces, glass. Dents, scratches, corrosion, wounds, broken glass
DO NOT aim the jet directly at the varnished or plasti cised surfaces
DO NOT apply the detergents directly onto the surfaces to be cleaned
DO NOT use steam cleaning equipment
Do not use excessive force
DO NOT bring the jet too close to the dirt. This may cause injury to the operator and con-
taminate parts that have already been cleaned, as well as the environment.
avoid detergents from coming into contact with nearby products.
ATTENTION !
Floor products. Vapours. Corrosion. Breathing diffi culty.
avoid contact, inhalati on.
23. 3 Cleaning of the outer parts (Daily/Weekly)
Clean all external parts of the cabinet every week. See “General instructi ons” chapter 22. 2.
23. 4 Clean the internal parts (Monthly)
Refer to chapters 22. 1 and 22. 2 and proceed as follows:
Step Acti on
1
remove all foodstuff from the cabinet and put it in a suitable place to maintain the same
storage temperature
2 remove all the removable parts, such as display dishes, grid trays, etc.
3 wash with lukewarm water (max 30°C)
4 clean with an anti bacterial detergent
5
carefully clean the bott om tank, the drip, and the grid that protects the water drain, elimi-
nati ng all foreign bodies that have fallen through the sucti on grid lift ing the sheet of the fans