Arneg Astana LX, Direction For Installation And Use

Page: 58 / 172

Astana LX - Mini Astana LX
English
05060194 01 05-2022 56
max allowed capacity evenly distributed on tray: 350 kg/m
2
(Fig.23)
max allowed capacity evenly distributed of shelves: 160 kg/m
2
(Fig.25)
Remedy • load the unit one door at a time
block the door in the open position until loading has been completed
DO NOT open and close continuously
• arrange the products in order and evenly (Fig.23)
• leave a 30 mm clearance between the goods and the top shelf (Fig.24)
• introduce products already cooled at the required storage temperature
• load the counter so that the goods from a longer time is sold before the newly
received goods (stock rotation)
• on bent shelves, always use retainers.
What to avoid
DO NOT obstruct/impede the flow of cooled air
DO NOT not place goods on cabinet’s roof (Fig.29)
NEVER introduce heated products
DO NOT obstruct the inlet of cooled air with: goods, price tags, price holders,
decorations etc.
DO NOT climb on the furniture (Fig.26). Use a compliant ladder to reach the
loading points.
i
Arrange the goods without leaving empty spaces, to improve cabinet performance
First use up the goods that have been stored in the unit the longest before adding new arriv-
als (foodstuffs rotation).
The Customer should:
check that all operations have been performed in compliance with applicable regulations
use suitable communication tools to warn the consumers from climbing onto the cabinets.
19. Defrosting and water drainage
Astana LX-Mini Astana LX are equipped with electric defrosting thanks to armoured heating ele -
ments.
19. 1 Draining the water
LV cabinet siphon insulation Fig.17
Astana LX and Mini Astana LX feature siphon insulation.
Install the insulation as shown in Fig.17.
Install a floor drain with a slight slope to avoid:
- unpleasant odours inside the cabinet
- dispersion of cooled air
- malfunction of the cabinet due to moisture
Procedure
- install a suitable siphon between the drain and the connection to ground
- hermetically seal the area of drainage to ground.
i
periodically check that hydraulic connections are perfectly efficient, contacting a qualified
installer.
20. Demisting and anti-condensation
The cabinet is equipped with heating cables in the frame to eliminate condensation and mist. The
heating cables are designed to work in class 3 environments (+25°C - 60%RH).
The heating cables must operate at full power.