5
WIZARD C2 PRO NICHIA USER MANUAL
ENG
REV_00-0003
2. Wipe the sealing ring thoroughly with a soft cloth (or tissue). Do not
use solvents. If the sealing ring is worn out or damaged replace it by
a new one.
3. Clean the metal threads with a brush using ethanol. Be careful not to
allow the applied liquid to get inside the flashlight or tailcap as it can
cause fails in functionality of the flashlight.
After cleaning lubricate the thread and the sealing ring with polyal-
phaolefin-based silica grease, e.g. Nyogel 760G. The application of
other types of grease is unacceptable. In case of active operation and
exploitation in dusty environments, it is recommended to perform
cleaning and lubricating of the parts as often as required.
WE DO NOT RECOMMEND
to leave power sources inside the flash-
light for a long storage period, as batteries (especially non-recharge-
able) can leak for various reasons and damage the inner parts of the
flashlight. If you want to keep your flashlight in a stand-by state with
batteries in, previously install new and high-quality batteries, store
the flashlight in acceptable for batteries operational temperature and
revise the batteries' state at least once a month. If you have noticed any
signs of defects, withdraw the batteries from the flashlight and dispose
of them.
Warranty and Service
Armytek provides free warranty repairs for 10 years (excluding bat-
teries, chargers, switches and connectors, which have 2-year warran-
ty) from the date of purchase if there is a document confirming the
purchase. The warranty does not extend to damage during:
1. Improper usage.
2. Attempts to modify or repair the flashlight by nonqualified special-
ists.
3. Application in chlorinated, contaminated liquids or sea water.
4. Immersion into liquids in case of broken leakproofness.
5. Exposure to high temperatures and chemicals, including the liquids
from defected batteries.
6. Usage of low-quality batteries.
Armytek
Germany, 10551 Berlin, Jonasstraße 6
+1 (206) 785-9574, [email protected]
www.armytek.com
