ARMODD 9057, Manual

Page: 66 / 116

66
Display activation by twisting the wrist
Tap on Others in the Da Fit app in your phone
(Fig. 3) and set it up (Fig. 7).
Calling
To activate this function, it is necessary to pair
the smartwatch with your phone’s Bluetooth.
Make sure Bluetooth is on in your phone and
the smartwatch is paired in the Da Fit app. Tap
on your smart watch in Bluetooth of the phone
and allow the functions.
If the function is permitted and the smartwatch
is paired with your phone, you may make and
answer calls both on the smartwatch and your
phone.
Up to 8 contacts can be saved on the smart-
watch via the app. Open Favourite contacts in
the app (Fig. 3) and tap on +. Select the desired
contact from your list and tap on Done (right
upper corner) to save.
The calling function can be switched off anytime and turned back on
by tapping on “BT call” on the smartwatch (Fig. 7).
List of functions
Swipe from left to right to show a list of functions.
Calling, Sleep, Heart Rate, Daily menu, Sports, Blood Pressure, SpO2,
Voice assistant, Weather, Remote camera shutter, Music player,
Breathing training, Games, Settings, Stopwatch, Alarms, Timer, Menu
style, Brightness, Vibrations, Theatre, Reset, Turn off, About, QR code
for downloading the app.
This list may vary depending on the specific version of the smart
watch and app.
Heart rate, EKG, Pressure, SpO2
After activation, wait for the measurement to begin and end. The
smartwatch must be in the correct position on your wrist.
fig. 7
EN