13
Installation
Advisory
Before operating the equipment, it must be unpacked, assembled and installed as
described in the steps that follow. Safe use of the equipment depends on following
the correct installation procedure.
Electrical Supply
Electrical Supply for Version S1-A
The equipment requires connection to a single phase, fused electrical supply. The
standard electrical supply for this equipment is 230 V, 50 Hz. Check that the voltage
and frequency of the electrical supply agree with the label attached to the supply
cable on the equipment. Connection should be made to the supply cable as follows:
GREEN/YELLOW - EARTH
BROWN - LIVE (HOT)
BLUE - NEUTRAL
Fuse Rating - 1 AMP
Electrical Supply for Version S1-B
The equipment requires connection to a single phase, fused electrical supply. The
standard electrical supply for this equipment is 120 V, 50 Hz. Check that the voltage
and frequency of the electrical supply agree with the label attached to the supply
cable on the equipment. Connection should be made to the supply cable as follows:
GREEN/YELLOW - EARTH
BROWN - LIVE (HOT)
BLUE - NEUTRAL
Fuse Rating - 2 AMP
Electrical Supply for Version S1-G
The equipment requires connection to a single phase, fused electrical supply. The
standard electrical supply for this equipment is 220 V, 60 Hz. Check that the voltage
and frequency of the electrical supply agree with the label attached to the supply
cable on the equipment. Connection should be made to the supply cable as follows:
GREEN/YELLOW - EARTH
BROWN - LIVE (HOT)
BLUE - NEUTRAL
Fuse Rating - 1 AMP
