8
Installation
Electromagnetic Compatibility
This apparatus is classified as Education and Training Equipment under the
Electromagnetic Compatibility (Amendment) Regulations 1994. Use of the apparatus
outside the classroom, laboratory or similar such place invalidates conformity with the
protection requirements of the Electromagnetic Compatibility Directive (89/336/EEC)
and could lead to prosecution.
Electrical Supply
F1-10-A
F1-10-B
F1-10-G
Green/yellow or
Green lead
Earth (Ground)
Earth (Ground)
Earth (Ground)
Brown or Black lead Live (Hot)
Live (Hot)
Live (Hot)
Blue or White lead
Neutral
Neutral
Neutral
Fuse Rating
10 A
20 A
10 A
Voltage 220-230V
110-120V
220V
Frequency 50Hz
60Hz
60Hz
The mains cable supplied with the equipment is terminated with a plug to suit the
local electrical supply. Three versions of the F1-10 are available:
F1-10-A 230V/1ph/50Hz – mains lead fitted with a 2 pin Shuko European style plug
with adaptor to 3 pin UK style plug.
F1-10-B 120V/1ph/60Hz – mains lead fitted with a 3 pin NEMA 5-15P plug.
F1-10-G 220V/1ph/60Hz – mains lead fitted with 3 pin NEMA 6-15P plug.
This apparatus is classified as Education and Training Equipment under the
Electromagnetic Compatibility (Amendment) Regulations 1994. Use of the apparatus
outside the classroom, laboratory or similar such place invalidates conformity with the
protection requirements of the Electromagnetic Compatibility Directive (89/336/EEC)
and could lead to prosecution.
Water Supply
A temporary supply of water is required for filling the sump tank (capacity 250 litres).
Connection to a water supply is not necessary when the bench is in use.
Drain
Temporary connection to a drain is required when emptying the sump tank after use.
A suitable flexible hose (not supplied) should be attached to the drain valve in the
front wall of the sump tank.
