Armedica QUANTUM 400 Service Instructions Manual Download

Page: 5 / 15

Table Options for Quantum 400 –

Heat –

(Option available on Model 400H) If the heat button is lighted, this indicates the

heat is in the ON position. If the heat button light is not lighted, this indicates the heat is
in the OFF position.

Patient Assist Bar –

(Option available on Model 400P) Patient assist bar allows for

greater ease of patient dismounting.

Facial Slot –

(Option #401) Face slot under foot cover apron allows for use as a therapy

or adjustment table.

Treatment Considerations –

1. Always assist the patient on and off the table. The optional patient assist bar is advised, however it

is recommended that an operator assist the patient.

2. Roller height should be set to a comfortable level. At no time should the patient experience pain or

discomfort during the treatment. Continue to monitor the patient during the treatment.

3. The optional heat control should be used with caution, especially on patients with reduced sensory

perception. Monitor the patient continuously during the treatment if heat is used.

4. It is recommended that lights above the table be turned down or off to prevent glare and discomfort

to the patient during treatment.

5. Always evaluate the patient before and after the treatment.

Cleaning and Maintenance –

CLEANING –

The use of a mild soap and water solution or an approved vinyl cleaner is

recommended to keep the table looking presentable. When using a soap solution, be sure to remove any
residue after cleaning. Do not use any agent that will dry out the vinyl such as alcohol, window
cleaning solutions, strong detergents or abrasive materials. Face paper squares are recommended in the
cervical area to cover the cervical pillow and vinyl and prevent skin oils from contacting the vinyl.

MAINTENANCE –

The Quantum 400/400H/400P requires very little routine maintenance. All tables

are extensively tested at the factory prior to shipping, however, occasionally rough treatment by
trucking companies my require minor adjustments after delivery. In the event unusual noises are heard
or proper operation is compromised, call the Armedica Service Department for assistance.

It is recommended that at six-month intervals, the top is removed and the following items are checked:
(

NOTE!

Use caution when operating table with top removed. Do not place hands inside the table

compartment while the table is operating. Be certain that you have no loose clothing or neckties that
may be caught in the chains or moving parts

1. Check to insure that the three black rollers are free to rotate without binding.

2. Check to insure that the chains are taut.

3. Check to insure that all wiring, including the power cord to the wall outlet, is stowed away

from moving parts.