background image

3

Indications –  

The Quantum 400/400H/400P is an electromechanical treatment table. It is designed to release 
muscle tension and deliver soothing massage. 

Contraindications –  

1. Phlebitis

2. Fractures or suspected fractures

3. Common skin problems such as:

sunburn, bruises, boils or shingles may be irritated by the rollers

4. Patients with fused discs or implanted scoliosis rods

5. Osteoporosis

Precautions –  

Use with caution on elderly patients

Use with caution on patients with acute pain

Not intended for use on patients weighing over 300 pounds

Positioning Patient on Table –  

1.

Make sure the rollers are in the down position.

2.

Have the patient remove any keys, wallets or other items from back pockets that may

 

cause discomfort when rollers are in motion.

3.

Assist patient onto the table with head at the roller end (above the Cervical –Thoracic 
– Lumbar position indicator) and feet over the foot cover apron.

4.

Position patient on the table so that the sacrum is located at the end of the roller slot.

 

Make sure the patient is centered on the table to allow the roller to track on both sides

 

of the spine. Place the knee pillow under the patient’s knees. 

Summary of Contents for QUANTUM 400
















Reviews: