XCHANGE ERV
EXTERNAL MOUNT
XEM - INSTALLATION & OPERATION MANUAL
COMMISSIONING CHECKLIST
GENERAL
Air Filters: Overall Size and Number
Drain Pipe Traps and Vents fitted to Indoor Unit as per Installation Instructions
Y / N
Drain is Clearing Water Properly
Y / N
Check Vibration of Unit
OK / EXCESSIVE
Belt Tensioning Adjusted
Y / N
Paint Finish Checked and Repaired
Y / N
DUCTING
Total Return Air Flow (Total of all inlets) (L/s)
Total System external resistance
(Pa)
Measured downstream of fan outlets plus upstream of Coil (s)
Estimate of Fresh Air Make Up (% or L/s)
ELECTRICAL
Supply Voltage
Supply Unit Fan Motor Amps
Exhaust Fan Motor Amps
Total Unit Amps
Thermostat Settings (ºC)
Thermostat Operating Correctly
Y / N
Contactors & Relays Operating Correctly
Y / N
All Terminals Checked for Tightness and Label signed
Y / N
EVAPORATIVE COOLING PADS
Water Pump Operating Correctly
Y / N
Even Distribution of Water over Celdek Pad
Y / N
Sump Level is correct when unit is turned off
Y / N
9
Summary of Contents for XEM 500
Page 2: ......
