Armcor Air Solutions
109-111 Northcorp Blvd, Broadmeadows 3047
P
1800 244 556
E
www.armcor.com.au
Date: 20/10/2016
Document: XEM Installation Manual
Version Number:
V2
XCHANGE ERV CEILING MOUNT
EXTERNAL MOUNT UNITS
XEM - INSTALLATION & OPERATION MANUAL
The standard Armcor warranty policy is a parts only
warranty for a 12 month period. If any defect in your Armcor
equipment is caused by FAULTY MATERIALS within the
warranty period, starting from the date of original purchase
it will be rectified or replaced without cost.
Additional labour warranty is available and must be
purchased at the time of ordering in accordance with the
warranty policy.
• Consequential damage
• Failure to start due to voltage conditions, blown fuses
or other damage cause by inadequate or interrupted
electricity supply
• Damage caused by accident, misapplication, abuse,
alteration, tampering or servicing by anyone other than
an authorized person
• Damage resulting from incorrect installation,
commissioning or use other than in accordance with the
installation and operating instructions issued by Armcor
Air Solutions
• Damaged caused by using equipment being located in a
corrosive atmosphere or by filter neglect
• Replacement of any worn drive belts if applicable
• Costs incurred for regular maintenance services
• The original service call costs in identifying a warranty
claim
• Freight and travel changes for work performed or parts
supplied outside of all capital cities in Australia
• Field wiring, refrigerant pipe run between units, the
condensation drainpipe or other accessories
• Any warranty work performed by Armcor Air Solutions
outside of Melbourne metro area will require the installing
contractor to provide free of charge: Oxy/Acetylene
Equipment, Dry Nitrogen, Vacuum Pump, Refrigerant Gas,
Reclaim Bottles, Recovery Unit, and any other associated
refrigerant tools.
• Any appliance plate is altered or removed
• Armcor Air Solutions has not be notified within 48 hours
of any fault occurring which may require warranty work
• Any unauthorized modification has been made to the
equipment or any part has be substituted or replaced
with non-original items
• Regular service has not been carried out by an appropriate
Armcor approved, licenced installer
• The unit is used other than for the heating and cooling
of air for human comfort – unless approved by Armcor
Air Solutions
• The system is installed in a mobile application (eg.
caravan, boat, crane)
Complete a warranty form available on our website www.armcor.com.au and return the Armcor Warranty Request Form
to: [email protected]
Contact us direct by phone on 1800 244 556 or email [email protected]
WHAT THE WARRANTY POLICY COVERS
WHAT THE WARRANTY POLICY DOES NOT COVER
THE WARRANTY WILL NOT APPLY IF;
HOW TO MAKE A WARRANTY CLAIM
WARRANTY
7
The Armcor Air Solutions Warranty Policy should be read in conjuction with the
Terms and Conditions of Sale. These are available on our website - www.armcor.com.au.
Summary of Contents for XEM 500
Page 2: ......
