www.
Armagard
.com
Page |
3
Toll Free (US):
1-866-434-0807
Call (UK):
0121-608-7210
Step 1: Locate your USB setup cable and download the appropriate drivers from Armagard’s
support website (files needed are detailed on the previous page).
Step 2: To configure the controller board you’ll need a computer (ideally a laptop) close
enough for the USB setup cable to reach the controller board.
Step 3: Unzip the Armagard USB Configurator folder, and copy the ‘ArmagardTerminal’
program onto your computers desktop.
Step 4: Next, locate the controller board within your enclosure. Also take note of the systems
LED’s (figure 1).
Warning: Make sure the enclosures power is switched off and unplugged before removing or
attaching the plastic see through plate to avoid the risk of an electric shock.
Figure 1
Step 5: Use a crosshead screwdriver to remove the plastic cover from the PCB board and
place the removed washers and nylocs to one side.
How to Connect to the Board
LED’s
