PDS-32/42/46/47/52/55
www.
Armagard
.com
Installation Manual Page |
1
Toll Free (US):
1-866-434-0807
Call (UK):
0121-608-7210
ARMAGARD PDS 32/42/46/47/52/55
– DISPLAY & WALL MOUNTING
(ENGLISH)
The following manual details the vital
information and safety precautions needed
for a safe installation of the Armagard PDS
landscape enclosure.
Due to the weight of your enclosure and for
personal safety, it is recommended to refer
to your company’s own health and safety
heavy lifting procedures before moving the
enclosure.
All power must be switched off until the
enclosure has been fully assembled and is
ready to use.
If your enclosure is for
outdoor use, don’t
attempt installation in bad weather; use
correct lighting for optimum viewing
conditions.
Tools required for installation, Phillips
Screwdriver, Drill and Sockets Kit or Wrench
READ THIS MANUAL THROUGH BEFORE INSTALLING YOUR UNITS TO ENSURE CORRECT
INSTALLATION AND THA
T YOU’RE COVERED UNDER WARRANTY.
Electrical plugs, display bracket screws and
wall plate bolts are not provided because of
different customer setups.
Armagard recommends that all enclosures
should be securely attached to the wall
before fitting the display to avoid any
damage during lifting.
Default thermostat settings can be found on
page eleven.
Because of its watertight seal, to lock an
enclosure you have to push firmly against
the door and then turn the key to lock.
32”-55”
INSTALLATION MANUAL
YOUR WARRANTY AGREEMENT IS VOID
if you perform any modifications on the
enclosure, for example, drilling or penetrating any additional holes into the enclosure.
FOR BEST PRACTICE
mount the enclosure using the recommended brackets to ensure
integrity.
