Arlotto ANVR832 User Manual Download Page 32

Page: 32 / 89

B. Load-Balancing: aggregating two Ethernet channels together to form a single channel for

network traffic sharing.

C. Fail-over: aggregating two Ethernet channels together to form a single channel for

redundancy in Ethernet paths.

4. Select one of the following mechanisms to configure the Ethernet channels (eth0, eth1) of

NVR:

A. DHCP IP setting: obtain IP Address, Netmask, Gateway, Primary DNS Sever and

Secondary DNS Server automatically via DHCP server (the IP Address and Netmask will

default to 192.168.1.200, 255.255.255.0 for eth0 and 192.168.1.201, 255.255.255.0 for

eth1 in case of no DHCP server existed )

B. Static IP Setting: configure IP Address, Netmask, Gateway, Primary DNS Sever and

Secondary DNS Server manually.

C. PPPoE setting: Enter User Name and Password provided by ISP. The system will return

the IP assigned by ISP in case of dialup successfully.

5. Specify Maximum Outgoing Bandwidth to restrict the amount of outgoing bandwidth of NVR

uses.

6. DDNS (Dynamic Domain Name Server) allows you to connect NVR with dynamic IP address.

You can refer to http://www.no-ip.com/services/managed_dns/free_dynamic_dns.html and

Summary of Contents for ANVR832


























































































Search results

Summary of Contents for ANVR832

Reviews:

Related manuals for ANVR832

Brands by name

Popular brands

Arlotto ANVR832, User Manual

Search results

Summary of Contents for ANVR832

Reviews:

Related manuals for ANVR832

Brands by name

Popular brands