11
10
Add Arlo Baby to the Apple Home app
1. Locate the HomeKit code.
The code is on the back cover of this guide and on the Arlo
Baby camera label located on the bottom of the camera.
You can type the HomeKit
code that is on the Arlo
Baby camera label
You can scan the
HomeKit code on the
back of this guide
xxx-xxx-xxx
If you are using an Arlo Baby character, rotate the character
feet and pull them off to see the HomeKit code on the label.
2. Launch the Apple Home app.
3. Tap the plus sign at the top of the page on the
Home
tab
and then tap
Add Accessory
.
Your Apple mobile device’s camera launches and you are
prompted to scan or enter the HomeKit code.
