13
12
4. Scan the HomeKit code using your mobile device’s camera.
If you have trouble scanning the code, tap
Don’t Have a
Code or Can’t Scan?
and then type the code.
5. After your camera is added, do the following to complete the
setup process:
•
Rename your camera.
•
Assign the camera to a room within HomeKit, or create a
new room to place it in.
•
Add the camera to your Favorites.
6. Tap
Done
on the top right.
For live video, tap the Arlo Baby screen shot. To start using two-
way audio, tap the microphone icon on the bottom right.
Arlo Baby features
¾
Rechargeable battery
Your Arlo Baby camera includes a built-in rechargeable
battery and can work for several hours at a time without
being plugged in. You can place the camera in locations
where you cannot connect it to a power outlet.
Use the switch on the bottom
of the camera to power the Arlo
Baby camera’s battery off. The
camera’s battery is on when the
green color is visible.
If the camera is unplugged and you don’t want the battery
to lose its charge, set the switch to Off.
Off
On
Use of the Works with Apple HomeKit logo means that an electronic accessory was designed
to connect specifically to iPod touch, iPhone, or iPad, respectively, and is certified by the
developer to meet Apple performance standards. Apple is not responsible for the operation of
this device or its compliance with safety and regulatory standards.
