CPIN002958
WLED1020 A5_ 2 pAgE instruction mAnuAL cpin002958
handheld WORKlIGhT
To Use Your Worklamp
To operate the worklamp, push the switch
button on the handle to switch on and off.
For hands free use or storage, use the inbuilt
top hang hook or magnet on the rear
It is recommended that you charge the
battery before first use.
Use only the power adapter supplied.
Plug power adapter cord into the socket on the
side of the handle. Plug the adapter into
240 Volt mains socket and switch power ON.
There is a red indicator lamp inside the lens of
the worklamp that will glow to indicate charging.
When the battery becomes fully charged this
red indicator will turn off.
Note – continuous or frequent charging will help
keep the worklamp at or near full power – there
is no danger of overcharging.
The light must be turned off during charging.
For charging from a vehicle 12 Volt
accessory socket, use the lead supplied.
Charging works in similar fashion to the ac
power adapter.
Instructions For Use & Care
1. Use the lamp in indoor or sheltered
areas only.
2. Keep out of reach of young children and pets.
3. To clean the lamp, use a wrung out damp cloth
with mild detergent. Do not use solvents or
harsh cleaning products.
4. If not using the lamp for long periods, charge
for 1-2 hours before storing.
5. Do not expose work light to extreme
temperatures.
6. The LED lamp is non-replaceable.
7. The electrical parts can only be serviced by
a qualified tradesman, in compliance with
standards/specifications.
Specifications
LAMP
15 x 0.2 Watt LED
3 Watt total
POWER ADAPTER Output 9 Volt DC
300mA
ChARgE TIME
Approx 7-8
hours
RUn TIME
On full charge Approx
4 hours
Warranty
Arlec guarantees this product in accordance with the Australian
Consumer Law.
Arlec also warrants to the original first purchaser of this product
(“you”) from a retailer that this product will be free of defects
in materials and workmanship for a period of 12 months from
the date of purchase; provided the product is not used other
than for the purpose, or in a manner not within the scope of the
recommendations and limitations, specified by Arlec, is new and
not damaged at the time of purchase, has not been subjected
to abuse, misuse, neglect or damage, has not been modified or
repaired without the approval of Arlec and has not been used for
commercial purposes (“Warranty”).
If you wish to claim on the Warranty, you must, at your own
expense, return the product, and provide proof of original
purchase and your name, address and telephone number,
to Arlec at the address below or the retailer from whom you
originally purchased the product within 12 months from the date
of purchase.
Arlec will (or authorise the retailer to) assess any claim you may
make on the Warranty in the above manner and if, in Arlec’s
reasonable opinion, the Warranty applies, Arlec will at its own
option and expense (or authorise the retailer to) replace the
product with the same or similar product or repair the product
and return it to you or refund the price you paid for the product.
Arlec will bear its own expenses of doing those things, and you
must bear any other expenses of claiming on the Warranty.
The Warranty is in addition to other rights and remedies you
may have under a law in relation to the product to which the
Warranty relates.
Our goods come with guarantees that cannot be excluded under
the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled
to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure does not amount to a
major failure.
Arlec Australia Pty. Ltd. ACN 009 322 105 (“Arlec”) gives the Warranty.
Arlec’s telephone number, address and email address are:
Customer Service: (03) 9982 5111 New Zealand Toll Free: 0800 003 329
Building 3, 31 – 41 Joseph Street, Blackburn North, Victoria, 3130
Blackburn North LPO, P.O. Box 1065, Blackburn North, 3130
Email: [email protected]
