Chapter 5 Managing your test results
5.1 Flagging test results
Flags help you categorize and identify results.
1.
Leave the test strip in the meter after the test result appears on the screen.
2.
Press the
Before-meal
For results
obtained
before eating.
After-meal
For results
obtained after
eating.
Before
For results
obtained
before
sleeping.
For inaccurate
results.
Not part of
your result
averages.
3.
Point the test strip down. Slide the test strip ejector to eject the test strip. The
meter turns itself off.
5.2 Reviewing past results
You can review past results stored in the memory. Your meter stores up to 500
test results. New results beyond the 500th overwrite previously stored results in
1.
Make sure the meter is off.
2.
Hold down button for 2 seconds to turn on the meter.
3.
7$ 97;7<
button.
4.
>9?##<
button.
The meter displays the most recent test result stored in the memory.
Three bars “---” appear when there is no past result.
NOTE
When the wireless communication is ON, the current receiving device is
displayed before past results. See “Transmitting all test results” in chapter 7 for
details.
5.
View the test result you want.
To go back to the previous result, press
button.
To go to the next result, press
button.
To scroll through results, hold down
or
button.
6.
To turn off the meter, hold down
button for 3 seconds.
5.3 Viewing result averages
You can view average values of past results.
1.
See steps 1, 2 and 3 in paragraph 5.2.
2.
Press
$9?JQ<
3.
>9?JQ<
button.
The result average changes in the order
of 7-, 14-, 30-, 60- and 90-day each time
button is pressed.
Three bars “---” appear when there is no past result to be included in the
average calculation.
4.
button.
5.
To turn off the meter, hold down
button for 3 seconds.
5.4 Deleting all test results
You can delete all test results from the memory. Remember that results cannot
be retrieved once deleted.
1.
See steps 1, 2, 3 and 4 in paragraph 5.2.
2.
Hold down both
and
' 9Z;#<
the operation at this point and return to the previous level, hold down the
button for 1 second).
The number of
tests included in
the calculation of
the result average.
3.
Hold down
button and
button together for 3 seconds to delete all test
results (a long beep sounds and “---” appears).
4.
To turn off the meter, hold down
button for 3 seconds.
5.5 Downloading test results
Test results stored in the GLUCOCARD™ SM meter’s memory can be
downloaded to GlucoLog
®
software and apps by A. Menarini Diagnostics using
either BLE communication (Bluetooth 4.0) or a standard Micro-B USB cable.
GlucoLog
®
software and apps are supplied separately.
For information on how to set the meter for Bluetooth communication, see
chapter 7 of this manual.
For additional information, consult the guide on Bluetooth connection provided.
When the meter is connected with a USB cable, “USB” blinks
on the display.
NOTE
Set the connection using electrical and electronical equipment (cable,
computer, etc.) that is compliant with applicable requirements.
To prevent software errors, which could lead to accidental data loss,
download test results to GlucoLog
®
software and apps only.
