Arkpak AP730, Instruction Manual

Page: 3 / 20

• The external AC/DC power supply is for indoor use only.
• When charging, adequate ventilation must be provided to dissipate heat and battery gases. Keep
clear of naked flame, spark or conductive material while charging a battery.
• Do not attempt to disassemble the ArkPak as this may result in electric shock, fire or explosion. Any
attempt to disassemble the unit, make unapproved repairs or modifications will void the warranty and
the user’s authority to operate the ArkPak.
• The ArkPak is not intended for use by children or infirm persons unless they are supervised or have
been instructed how to use the ArkPak by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the ArkPak.
• For charging 12 volt 6 cell lead acid or 12V lithium iron phosphate batteries of 60Ahr to 140Ahr
capacity only. Do not attempt to recharge non-rechargeable batteries.
• If AC cord is damaged do not attempt to use the ArkPak.
• Disconnect the mains supply before making or breaking connections to the battery
• Never try to insert a foreign object into the 240V AC socket except an approved 240V AC electrical
plug. The 240V AC socket should be treated the same as a mains electrical socket in your home.
• Never use the 240V AC socket outdoors if it is raining.
• The main isolator switch must be in the off position when inserting an electrical plug into the 240V
AC socket, or if the ArkPak is not in use.
• The AC/DC adaptor can emit a noticeable amount of heat whilst charging and should be placed in
a location where it can get plenty of airflow.
• When charging the battery or powering a device from one of the outlets the lid of the ArkPak should
be closed and latched shut.
• Continuously discharging the battery down to 0% may reduce its serviceable life. It is recommended
to always leave at least 20% capacity unused.
• The ArkPak is not suitable for powering any type of medical electrical device or equipment.
WARNINGS
1