VeriMAG2 User Guide
6
V1.2 2018-01-25
VeriMAG2 software
The VeriMAG2 software is used to read out the previously saved MAGX2 flowmeter tests. The SW has its
own internal database. Each previously saved test is possible to print any time.
3.4. SW Installation
The SW can be found on the pen drive delivered with the device or downloaded from
www.arkon.co.uk/support
.
To install the SW double right click on setup.exe and select option Run as Administrator and follow
instructions.
Connect the VeriMAG2 device to your computer via USB port and install driver – in case it is not installed
automatically you can find the driver in the installation folder – default in:
Program Files\Arkon Flow Systems\VeriMAG2
3.5. Connecting to VeriMAG2
Connect the device to your computer and start by clicking to Refresh COM ports button to find the COM ports
available. Mind the connected device has to be in a range of COM1-COM7 – you can check/change this
setting in a device manager under COM and LPT ports settings.
Select the COM port the device is connected to and press Connect button. After successful connection you
can see number of records loaded in the device. By clicking on Read from VeriMAG2 you can download them
into SW internal database. After successful readout the data in the instrument are deleted and remain in the
internal SW database.
