VeriMAG2 User Guide
4
V1.2 2018-01-25
3.
Tester menu
The following symbols are used in this manual and on the flowmeter display.
ENTER
LEFT
Esc
Selection menu
Back
DOWN
RIGHT
UP
Touch-buttons are working on capacitance principle therefore any conductive material close to
button's area will cause button press.
3.1. Main screen
Upon starting the device, you will automatically see the main
screen of the menu.
Navigate with
and select your choice with
.
Top left is VeriMAG2 internal battery indicator.
Next Test ID number is shown in top middle and time set in
top right.
Info - information about the VeriMAG2 device
Setting - setting of Date, Time and backlight of the display
Start Test – see chapter 3.2
POWER OFF – power the device off, to turn it on press any
key for 5 seconds.
Unit No. - unique serial number of the VeriMAG2 device.
Firmware - version of FW for the device.
Calibration Date - date of the last calibration of the device. To
keep traceability it is recommended to let the VeriMAG2
device calibrated once a year.
Date – set time that is used to backtrack test date
Time – set time that is used to backtrack test time
Backlight – switches VeriMAG2 backlight on and off
