V1.3
4 SMS COMMANDS
Please note that all commands are case sensitive and have to be written in capital letters.
4.1 Set Phone Number
This command sets up the phone number and the 3G/GPRS/GSM module confirms the settings
immediately by SMS.
This function works 15 minutes after plugging battery
.
Query:
SET PHONE1 UNITNO NUMBER
SET PHONE2 UNITNO NUMBER
SET PHONE3 UNITNO NUMBER
UNITNO
means the unit number of MAGB1 where the query is sent.
UNITNO
is used for authorization.
NUMBER
means requested phone number for sending interval or
NONE
erases existing phone number.
It is possible to set up to 3 phone numbers. 3G/GPRS/GSM module sends data from MAGB1 at specific
intervals to all 3 phone numbers. It is possible to set up just one or two phone numbers.
Syntax
Response example
Remarks
SET PHONE1 0420123456789
SET PHONE2 0987654321
SET PHONE3 0123456 NONE
PHONE1 0420123456789
PHONE2 0987654321
PHONE3 0123456 NONE
3G/GPRS/GSM module
sends data in specific
intervals to all 3 phone
numbers.
4.2 Set GSM Service Center Address
This command sets up the GSM service center address and the 3G/GPRS/GSM module confirms the
settings immediately by SMS.
This function works 15 minutes after plugging battery
.
Query:
SET GSMSERVICE UNITNO ADDRESS
UNITNO
means the unit number of MAGB1 where the query is sent.
UNITNO
is used for authorization.
ADDRESS
means the phone number of the Service Center.
Syntax
Response example
Remarks
SET GSMSERVICE 01420603052000
GSMSERVICE 01420603052000
This command sets
the
service
center
address.
All phone numbers must be in international format (for e420123456789)
All phone numbers must be in international format (for e420123456789)
Summary of Contents for MAGB1
Page 1: ...V1 3 ...