V1.3
3 INSTALLATION
•
Open the transmitter.
•
Unplug the battery.
•
Deactivate the SIM card PIN lock.
•
Delete all SMS messages in SIM memory.
•
Insert the SIM card to the 3G/GPRS/GSM Module, see picture 1.
•
Plug-in the 3G/GPRS/GSM module into the transmitter (into the GPRS Module slot, see
picture 3).
•
Install external antenna to the 3G/GPRS/GSM Module.
•
Plug-in the 3G/GPRS/GSM module battery.
•
Plug-in the MAGB1 main battery
3.1 SIM interface
Before inserting or replacing SIM card
– MAGB1 transmitter must be switched off!
Otherwise, MAGB1 transmitter, SIM card or GPRS module may get damaged!
The 3G/GPRS/GSM module incorporates a SIM interface, which conforms to the GSM 11.11
and GSM 11.12 standards that are based on the ISO/IEC 7816 standard. These standards define the
electrical, signaling and protocol specifications of a GSM SIM card.
The manufacturer does not supply the SIM card, which is mandatory for a connection to the
GPRS/GSM network! The SIM card may be purchased from your GSM (mobile) service provider!
3.2 SIM card installation
Insert the SIM card to the 3G/GPRS/GSM module according to picture bellow.
Picture 1. SIM card installation into the 3G/GPRS/GSM Module
Summary of Contents for MAGB1
Page 1: ...V1 3 ...