V1.3
6 COMMON COMMANDS
Please note that all commands are case sensitive and have to be written in capital letters.
6.1 Set Sending Interval
This command sets up the sending interval and the 3G/GPRS/GSM module confirms the settings
immediately by SMS.
This function works 15 minutes after plugging battery
.
Query:
SET INTERVAL UNITNO MMMM
– MMMM means number of minutes for sending interval.
Syntax
Response example
Remarks
SET INTERVAL 01234567 0120
INTERVAL 01234567 0120
3G/GPRS/GSM module sends every 2
hours flow and totalizers to specified
phone numbers / TCP port.
6.2 Stop sending
This command stops the SMS/DATA sending by 3G/GPRS/GSM module. The 3G/GPRS/GSM module
confirms settings immediately by SMS.
This function works 15 minutes after plugging battery
.
Query:
STOP SMS UNITNO
UNITNO
means the unit number of MAGB1 where the query is send.
UNITNO
is used for authorization.
Syntax
Response example
Remarks
STOP SMS 01234567
0123456 SMS SENDING STOPPED
This command stops
the
SMS/DATA
sending.
6.3 Start sending
This command starts the SMS/DATA sending by 3G/GPRS/GSM module. The 3G/GPRS/GSM module
confirms settings immediately by SMS.
This function works 15 minutes after plugging battery
.
Query:
START SMS UNITNO
UNITNO
means the unit number of MAGB1 where the query is sent.
UNITNO
is used for authorization.
Syntax
Response example
Remarks
START SMS 01234567
01234567 SMS SENDING STARTED
This
command
starts
the
SMS/DATA
sending.
Summary of Contents for MAGB1
Page 1: ...V1 3 ...