P.2
3. Press MUSIC button and turn the speakers ON. The POWER LED will light up
in blue. Switch off the speakers by pressing the MUSIC button on the speaker,
and the LED will be off.
OPERATION
1. Turn on the audio source (TV or audio component) to which the transmitter is
connected with. The green LED on the transmitter will light up.
2. Select the channel (1/2/3) of the transmitter for best performance in your
location.
3. Switch on the in-house power switch, and then press the “MUSIC” button on the
speaker to turn on the speaker. Press the “AUTO TUNE” button to get the best
tuning reception in the speakers. When the button is pressed, frequency
tuning starts automatically and it stops when a signal is detected.
4. Volume can be adjusted up by
pressing “+” button or down by
pressing the button “-“ to the
desired listening level.
5. Select the “LIGHT” switch to ON or
OFF the lighting.
6.
7.
NOTE :
a). Keep a distance of the speaker up to 7 meters apart from the transmitter,
and then press “AUTO TUNE” button for the best reception.
b) Whenever you find frequency jam, move your channel switch from one
channel to the other channel (there are three channels for selection) on the
transmitter, and then press the “AUTO TUNE” button again.
6.
Should there is any disruption (signal cuts off or carries distortion), press the
speaker’s “AUTO TUNE” button to maximize the best reception.
You can switch to another transmission by selecting another channel (1 , 2 or
3) of the transmitter, then press “AUTO TUNE” button of the speaker for best
reception.
When transmitting / receiving over long distances, the signal from the system