P.1
INSTALLATION
TRANSMITTER
1. Insert the antenna tube into the antenna wire.
2. Connect the supplied AC/DC power adaptor to an electrical wall outlet.
3. Plug the AC/DC power adaptor in the DC jack located on the rear of the
transmitter.
4. When the AC adaptor is plugged in, the blue POWER LED illuminates. If the
blue POWER LED does not illuminate, make sure the adaptor is plugged in.
5. The rear of the transmitter has one RCA input that can be connected to audio
output jack of TV, Monitor, VCR, Radio recorder, CD/MP3/VCD/DVD players or
to headphone/earphone jack with the connector provided.
When the transmitter received an audio signal, the green SIGNAL LED and the blue
POWER LED will illuminate together. If the green SIGNAL LED does not illuminate,
ensure the audio source is turned on.
SPEAKER RECEIVERS
1. Once speaker unit has been fastened to the wall, turn ON the power switch
(in-house power button).
2.
Remove the rubber cover of the function key that located at the bottom of
speaker. Switch on the lamp by select the Light ON/OFF to ON position.
Please ensure the in-house power switch need to be switch on before the lamp
speaker can be operated. Switch off the light by set the LIGHT button to OFF,
and the light bulb will be off.