Arkon AW850 User Manual Download Page 10

  

P.5 

 

CAUTION

 

 

1) 

Read these instructions. 

2) 

Keep these instructions. 

3) 

Heed all warnings. 

4) 

Follow all instructions. 

5) 

Do not use this apparatus near water. 

6) 

Clean only with dry cloth. 

7) 

Do not block and ventilation openings.    Install in accordance with the 

manufacturer’s instructions. 

8) 

Do not install near any heat sources such as radiators, heat registers, stoves, 

or other apparatus (including amplifiers) that produce heat. 

9) 

Do not defeat the safety purpose of the polarized or grounding-type plug.    A 

polarized plug has two blades with one wider than the other.    A grounding 

type plug has two blades and a third grounding prong.    The wide blade or the 

third prong are provided for your safety.    If the provided plug does not fit into 

your outlet, consult an electrician for replacement of the obsolete outlet. 

10)  Protect the power cord from being walked on or pinched particularly at plug, 

convenience receptacles, and the point where they exit from the apparatus. 

11)  Only use attachment/accessories specified by the manufacturer. 

12)  Use only with cart, stand, tripod, bracket, or table specified by the 

manufacturer, or sold with the apparatus.    When a cart is used, use caution 

when moving the cart/apparatus combination to avoid injury from tip-over. 

13)  Unplug this apparatus during lighting storms or when unused for long period of 

time. 

14)  Refer all serving to qualified service personnel,    Serving is required when the 

apparatus has been damaged in any way, such as power-supply cord or plug 

is damaged, liquid has been spilled or objects have been fallen into the 

apparatus, the apparatus has been exposed to rain or moisture, does not 

operate normally, or has been dropped. 

 

 

 

Summary of Contents for AW850












Reviews: