![Arkbird FPV OSD V3.1028 Manual Download Page 21](http://html.mh-extra.com/html/arkbird/fpv-osd-v3-1028/fpv-osd-v3-1028_manual_2972617021.webp)
Arkbird FPV
-21-
“Debugging Skills for Balance and RTH Mode” chapter of our instructions.
Make ground video recordings. When switching to RTH or other autonomous flight modes, Roll/ Pitch
inclination value and throttle control value will be shown at the bottom right corner of OSD. These data will tell
you if the control values are proper and will help you judge which parameter needs to be sub-trimmed.
13
Attention
:
Please read through carefully:
1. The design purpose of autopilot is to keep balance of flight, it is not able to manipulate plane or prevent stall.
You must have sufficient experiences of fixed wing to control the flight.
2. The autopilot is only for small-scale RC model. For safety concern, please do not install in plane for aerial
photography which might fly over crowd.
3. Please install the autopilot depends on your demands and check the condition before flying every time.
4. Any equipments and electric products on the plane couldn’t be completely reliable, please using this system
following the instruction. The system provider is not responsible for any direct or indirect loss and consequence
caused by using this product.
///////////////////////////////////////////////////////////////////////////////////////////////////