Arkbird
- 6 -
Q: The horizontal pointing is inaccurate;
A: Check the communication link. Check if there is metal or magnetic interference near PTZ then calibrate the
device again.
If there is a constant angle error, please press "button 1" or "button 3" for adjustment under four-point
calibration mode.
Q: When the aircraft is still grounded and PTZ is rotating or pointing inaccurately;
When PTZ on the ground is very close to the airborne module, it may point to the wrong direction because of
GPS's drifting error, which is a normal circumstance and the error will disappear after takeoff.
Attention:
Please read through carefully:
1. The autopilot can only be used for small-scale RC model. Please do not install it in a camera
plane which might fly over crowded areas for safety concern.
2. Please install and manipulate the autopilot according to instructions and check the condition
before every flight.
3. Not all equipments and electric products of the plane are completely reliable. Please follow
the instructions and regulations. The provider of the system is not responsible for any direct or
indirect loss and consequences caused by the product.
Please send an email to [email protected] if there is any comment or suggestion. We are looking
forward to hearing your comments in order to improve our products constantly!